The operation skills of ultra -fine class machines:
1, carefully check whether the equipment is damaged during the transportation before the ultra -fine grinding, then Appropriate auxiliary control devices, and then the main auxiliary pipeline roads must be used when each pipeline flange is assembled. The connected grounding conductor, and the ground to avoid static discharge caused by the explosion of dust.
2, before, each single trial operation must have metal items inspection machines, if excluded. The bolts are fixed, the belt is loosened, and the advantages of reliability are shielded.
3, the stability of the motor that started in the following order is close to the start of the start, rolling the machine-\u0026 gt; filter-\u0026 gt; grading device spiral-\u0026 gt;-\u0026 gt; open the door.
4, after five minutes, the air load is running. The operator should carefully observe various instrument control cabinets. The air load current is stable and edible. After feeding, the current does not allow the current to exceed the rated value of 32.6A, otherwise it should be reduced to ensure the normal operation of the discharge time.
5, stop the spiral to the feeder in the following order-\u0026 gt; Run for five minutes, stop the grinding machine, vacuum cleaner, classifier-\u0026 gt; closed aircraft.
Schedule transmission handle
6, the operation of this classifier can change the rotation speed of the hierarchical wheel and adjust the quality of the product. Such as fine particle size, speed up the needs of the product, and reduce the speed, the particle size is large.