The application of airflow crusher is becoming more and more common, and the development speed of many companies in the society has also improved a lot. It is needless to say that workers' work efficiency is to directly contact the material. The cleanliness of the machine is very important, directly affecting the quality of the material. The following editors tell you how to clean the crusher.
1. The production of air flow crusher ends, turn off the power supply, and send all the materials in the production to the material in and out of the material to be sent to the middle station. Hanging equipment is to be cleaned. 2. Open the chemical crusher and move the feed bag, sieve net, demolished air duct, etc. into the cleaning room. Inject about 2/3 of the temperature of 30 ~ 40 ° C in the water sink, soak for 10-30 minutes, and then use the flowing water to collect the front and back of the powder to clean the powder. Wash the water to clarify and rinse it with ionic water three times. Dry and set aside in the same level of cleaning areas as crushed. 4. Take warm water with a clean -dedicated cloth, and repeatedly wipe the material imports, the inner cavity of the crusher, the inner cavity of the crusher, the material export, and the powder collection room. 5. Wipe the inner wall of the chemical crusher, the inner wall of the chemical crusher, and the whirlwind separator. 6. Wipe the above -mentioned parts with a clean dry towel, and then wipe it with 75%ethanol. 7. Wipe the operation room, power distribution cabinet, motor and operating cabinet. After the cloth bags and sieve nets are dry, the ground to the ground from the ground to the ground without dust and stagnation on the ground to the ground on time. The cleanliness of the airflow crusher is an important indicator of the crushing operation. After we use it, we must clean it, clean and clean it carefully. In order to be more convenient to use it next time, it also avoids the quality of the material. Therefore Everyone should pay attention in the future.