How much is the airflow crushing machine? A Qingdao Youmingke high -efficiency airflow crushing machine Qingdao Youmingke Fan Fan Engineering Technology Co., Ltd. strives to bring the majority of customers ZUI through advanced technology, high -quality products, preferential prices, and complete services. Interests!
The main factor affecting the effect of the air flow crusher: 1. The pressure of pressure work quality is the main parameter to generate the speed of jet flow, and it also affects the crushing details The main parameters of the degree. The kinetic energy of the working -quality jet is proportional to the square of its quality, which is directly proportional to the square. Therefore, the higher the pressure, the faster the speed, the greater the momentum. Although the air flow rate no longer increases, the pressure increases, and the density of the airflow increases with it, and the same momentum has increased accordingly. As for how high pressure to choose when crushing, it depends on the crushing and fineness requirements of things. When using the heat steam to smash the titanium Baifen, the steam pressure is generally 0.8 to 1.7MPa. The material can be lower. 2. Due to the increased temperature, the flow rate of the gas can be accelerated. Taking the air as an example: the critical speed at room temperature is 320m/s. When the temperature rises to 480 ° C, the critical speed can be increased to 500m/s, that is, the kinetic energy increases by 150 by 150 %, So it is beneficial to improving the temperature of work quality. The temperature of overheating steam when crushing titanium BAIFEN is generally about 300 to 400 ° C. Usually the temperature is high when the shattering is crushed, and the material after the surface treatment is lower, because some surface treatment agents, especially the organic surface treatment agent is not resistant to high temperature, is not resistant to high temperature. Sometimes you only need to overheat 100 ° C on the basis of the original steam temperature. Precautions for air flow crusher (1) Unloading equipment cannot be reached when unloading equipment is running to avoid accidents. (2) The speed of the impeller cannot exceed the regulations, otherwise the temperature will be too high and damage the impeller and motor. (3) The safety valve should be checked regularly to ensure safety. The airflow crusher is completely closed during the crushing process. It has a professional dust collection device and does not cause dust leakage. This is a good device for many factories that need to be renovated by environmental assessment. This airflow crusher is widely used, and in chemical, mining, abrasives, refractory materials, battery materials, metallurgy, building materials, pharmaceuticals, ceramics, feed, new materials, environmental protection and other industries, and various dry powder materials, super fine crushing and dispersing, dispersed and dispersed And the whole particles are well performed well, and they can fully meet the super fine crushing of various materials.