The common crushing process of air flow crusher is divided into low temperature crushing, crushing at room temperature, crushing at high temperature, closed and open roads. Different crushing processes are suitable for different materials. For example: resin materials are suitable for low temperature crushing; high moisture content is suitable for high temperature crushing, lithium battery materials are suitable for closed airflow crusher, lithium carbonate is suitable for crushing routine airflow, non -mine is suitable for normal temperature opening airflow pieces, and so on. The following editors will take you to know the closed airflow crusher.
The powder stored in the warehouse is evenly giving a crushing cavity by the material, and the compressed gas is sprayed by the Rawar nozzle to generate supersonic airflow Driven the motion of the powder, the collision between the powder and the friction make the powder particles change from large. After crushing, the powder is screened by a classification wheel, and the whirlwind is separated. Qi separation, under the influence of the influence, keeps the crushing system stabilized. Next, the main explanation of the closed -road airflow crusher process: The closed airflow crusher generally refers to the air outlet of the pulse dust collector based on the airflow crusher. The system enables the crushing medium (air or nitrogen, rigidity, carbon dioxide, carbon dioxide and other inert gases such as air or nitrogen gas) in the closed system. Consultation airflow crusher is a closed air flow crushing system developed by the crushing needs of flammable, explosive, volatile, volatile and other special materials. The working process is that the inert gas after cooling is accelerated into the supersonic airflow through the Lawar nozzle, and the spray of the crushing area of \u200b\u200bthe crusher is sprayed to the crushing area. The sound airflow belt the animal material in the crushing area to achieve the crushing target. The crushed materials entered the hierarchical area with the uplifting airflow, and in the hierarchical zone, it was selected by the horizontal turbine grading wheel to achieve the particle size requirements. The sort of the powder size of the powder is adjusted by the speed speed of the hierarchical wheel. The split -out products are discharged from the gas flow from the centrifugal separator or filtered by the dust capture set. Broken. The filtered inert gas is used after compressing the compressor system, and the entire process is automated.